Instruction manual

Guppy PRO Technical ManualV4.1.0
203
Configuration of the camera
Status and control register for one-push
The OnePush feature, WHITE_BALANCE, is currently implemented. If this flag is
set, the feature becomes immediately active, even if no images are being input
(see chapter One-push white balance on page 83).
Off-
set
Name Field Bit Description
800h BRIGHTNESS Pres-
ence_Inq
[0] Presence of this feature
0: N/A
1: Available
Abs_Control [1] Absolute value control
0: Control with value in the Value field
1: Control with value in the Absolute
value CSR
If this bit = 1, value in the Value field is
ignored.
--- [2-4] Reserved
One_Push [5] Write 1: begin to work (self-cleared
after operation)
Read: Value=1 in operation
Value=0 not in operation
If A_M_Mode =1, this bit is ignored.
ON_OFF [6] Write: ON or OFF this feature
Read: read a status
0: OFF, 1: ON
If this bit =0, other fields will be read
only.
A_M_Mode [7] Write: set the mode
Read: read a current mode
0: Manual
1: Auto
--- [8-19] Reserved
Value [20-
31]
Value.
Write the value in auto mode, this field
is ignored.
If ReadOut capability is not available,
read value has no meaning.
804h AUTO-EXPOSURE See above
Note: Target grey level parameter in
SmartView corresponds to Auto_expo-
sure register 0xF0F00804 (IIDC).
Table 122: Feature control register