Instruction manual

Guppy PRO Technical ManualV4.1.0
204
Configuration of the camera
80Ch WHITE-BALANCE Pres-
ence_Inq
[0] Presence of this feature
0: N/A
1: Available
Always 0 for Mono
Abs_Control [1] Absolute value control
0: Control with value in the Value field
1: Control with value in the Absolute
value CSR
If this bit = 1, value in the Value field is
ignored.
--- [2-4] Reserved
One_Push [5] Write 1: begin to work (self-cleared
after operation)
Read: Value=1 in operation
Value=0 not in operation
If A_M_Mode =1, this bit is ignored.
ON_OFF [6] Write: ON or OFF this feature,
Read: read a status
0: OFF
1: ON
If this bit =0, other fields will be read
only.
A_M_Mode [7] Write: set the mode
Read: read a current mode
0: Manual
1: Auto
U_Value /
B_Value
[8-19] U value / B value
Write the value in AUTO mode, this field
is ignored.
If ReadOut capability is not available,
read value has no meaning.
V_Value /
R_Value
[20-
31]
V value / R value
Write the value in AUTO mode, this field
is ignored.
If ReadOut capability is not available,
read value has no meaning.
810h HUE See above
Always 0 for Mono
814h SATURATION See above
Always 0 for Mono
818h GAMMA See above
Off-
set
Name Field Bit Description
Table 122: Feature control register