Instruction manual

Guppy PRO Technical ManualV4.1.0

214

Configuration of the camera

Maximum resolution

This register indicates the highest resolution for the sensor and is read only.

Time base

Corresponding to IIDC, exposure time is set via a 12-bit value in the correspond-

ing register (SHUTTER_INQ [51Ch] and SHUTTER [81Ch]).

This means that you can enter a value in the range of 1 to 4095.

Guppy PRO cameras use a time base which is multiplied by the shutter register

value. This multiplier is configured as the time base via the TIMEBASE register.

0xF1000100 CAMERA_STATUS Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..23] Reserved

ID [24..31] Implementation ID = 0x01

0xF1000104 --- [0..14] Reserved

ExSyncArmed [15] External trigger enabled

--- [16..27] Reserved

ISO [28] Isochronous transmission

--- [29..30] Reserved

Idle [31] Camera idle

Table 129: Advanced register: Camera status

Note



This register normally outputs the MAX_IMAGE_SIZE_INQ For-

mat_7 Mode_0 value.

This is the value given in the specifications tables under

Picture size (max.) in chapter Specifications on page 34.

0xF1000200 MAX_RESOLUTION MaxWidth [0..15] Sensor width

(read only)

MaxHeight [16..31] Sensor height

(read only)

Table 130: Advanced register: Maximum resolution inquiry