Instruction manual

Guppy PRO Technical ManualV4.1.0
222
Configuration of the camera
Auto shutter control
The table below illustrates the advanced register for auto shutter control. The
purpose of this register is to limit the range within which auto shutter operates.
Note

• Only one edge is delayed.
•If IntEna_Out is used to control an exposure, it is possi-
ble to have a variation in brightness or to precisely time a
flash.
Figure 87: Delayed integration timing
Register Name Field Bit Description
0xF1000340 IO_INTENA_DELAY Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
ON_OFF [6] Enable/disable integration
enable delay
--- [7..11] Reserved
DELAY_TIME [12..31] Delay time in μs
Table 137: Advanced register: Delayed Integration Enable (IntEna)
Integration time Integration time
IntEna_real
IntEna_out
Delay
time
Delay
time