Instruction manual
Guppy PRO Technical ManualV4.1.0
227
Configuration of the camera
Trigger delay
The advanced register allows start of the integration to be delayed via
DelayTime by max. 2
21
μs, which is max. 2.1 s after a trigger edge was detected.
Mirror image
The table below illustrates the advanced register for Mirror image. Mirror image
is only possible with Guppy PRO F-503.
• With Guppy PRO F-503B, horizontal and vertical mirror is possible.
• With Guppy PRO F-503C, only horizontal mirror is possible.
Register Name Field Bit Description
0xF1000400 TRIGGER_DELAY Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
ON_OFF [6] Trigger delay on/off
--- [7..10] Reserved
DelayTime [11..31] Delay time in μs
Table 142: Advanced register: Trigger delay
Note
Trigger delay works with external trigger modes only.
Register Name Field Bit Description
0xF1000410 MIRROR_IMAGE Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
ON_OFF [6] Mirror image on/off
1: on
0: off
Default: off
--- [7..31] Reserved
Table 143: Advanced register: Mirror