Instruction manual

Guppy PRO Technical ManualV4.1.0
228
Configuration of the camera
Soft reset
The soft reset feature is similar to the INITIALIZE register, with the following
differences:
• 1 or more bus resets will occur
• The FPGA will be rebooted
The reset can be delayed by setting the Delay to a value unequal to 0.
The delay is defined in 10 ms steps.
Register Name Field Bit Description
0xF1000510 SOFT_RESET Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
Reset [6] Initiate reset
--- [7..19] Reserved
Delay [20..31] Delay reset in 10 ms steps
Table 144: Advanced register: Soft reset
Note

If the SOFT_RESET has been issued, the camera no longer
responds to further read/write requests.
You might detect errors of incomplete 1394 transactions.