Instruction manual
Guppy PRO Technical ManualV4.1.0
233
Configuration of the camera
Examples:
• Power on is not shown.
• Isochronous traffic is not shown.
• Asynchronous traffic is not shown.
Register Name Field Bit Description
0xF1000640 SWFEATURE_CTRL Presence_Inq [0] Indicates presence of this feature (read only)
BlankLED_Inq [1] Indicates presence of Disable LEDs feature.
--- [2..15] Reserved
--- [16] Reserved
BlankLED [17] 0: Behavior as described in chapter Status
LEDs on page 64.
1: Disable LEDs. (Only error codes are shown.)
--- [18..31] Reserved
Table 149: Advanced register: Software feature control (disable LEDs)
Note
During the startup of the camera and if an error condition is
present, the LEDs behave as described in Chapter Status LEDs
on page 93ff.