Instruction manual

Guppy PRO Technical ManualV4.1.0

Camera interfaces

This chapter gives you detailed information on status LEDs, inputs and outputs,

trigger features and transmission of data packets.

IEEE 1394b port pin assignment

The IEEE 1394b connector is designed for industrial use and has the following

pin assignment as per specification:

Note



For a detailed description of the camera interfaces (FireWire,

I/O connector), and operating instructions see the 1394

Installation Manual, Chapter Camera interfaces.

Read all Notes and Cautions in the 1394 Installation Manual,

before using any interfaces.

Figure 27: IEEE 1394b connector

Note



IEEE 1394b connectors with screw lock mechanism provide

access to the IEEE 1394 bus and thus makes it possible to con-

trol the camera and output frames.

www



For more information on cables and on ordering cables

online (by clicking the article and sending an inquiry) go to:

http://www.alliedvision.com/en/contact

56789

Pin Signal

1TPB-

2TPB+

3TPA-

4TPA+

5 TPA (Reference ground)

6VG (GND)

7N.C.

8VP (Power, VCC)

9 TPB (Reference ground)