Instruction manual

Guppy PRO Technical ManualV4.1.0
63
Camera interfaces
Camera I/O connector pin assignment
Figure 28: Camera I/O connector pin assignment
Note

GP = General Purpose
For a detailed description of the I/O connector and its operat-
ing instructions see the 1394 Installation Manual, Chapter
Guppy PRO input description.
Read all Notes and Cautions in the 1394 Installation Manual,
before using the I/O connector.
1
4
5
3
2
6
7
8
9
10
11 12
Pin Signal Direction Level Description
1 External GND GND for ext. power External Ground for
external power
2 External Power 8–36 V DC Power supply
3 --- --- --- ---
4 Camera In 1 In U
in
(high) = 3–24 V
U
in
(low) = 0–1.5 V
Camera Input 1
(GPIn1)
default: Trigger
5 Camera Out 3 Out Open emitter, Camera Output 3
(GPOut3)
default: Busy
6 Camera Out 1 Out Open emitter Camera Output 1
(GPOut1)
default: IntEna
7 Camera In GND In Common GND for
inputs
Camera Common Input
Ground (In GND)
8 --- --- --- ---
9 --- --- --- ---
10 Camera Out
Power
In Common VCC for
outputs
max. 36 V DC
External Power
for digital outputs
(OutVCC)
11 --- --- --- ---
12 Camera Out 2 Out Open emitter Camera Output 2
(GPOut2)
default: Off