Instruction manual

Guppy PRO Technical ManualV4.1.0
64
Camera interfaces
Status LEDs
There is one bicolor LED: showing green or orange (If half green and half red is
on you see an orange color).
RED means: red half of LED permanent on
+RED pulsing means: red half of LED is switched on for a short time. If the red LED
is already on, the LED will be switched off.
GREEN means: green half of LED permanent on
+GREEN pulsing means: green half of LED is switched on for a short time. If the
green LED is already on, the LED will be switched off.
Normal conditions
Figure 29: Position of status LED (example showing green half of LED on)
Event (GREEN) (RED)
Camera startup During startup all LEDs are switched on consec-
utively to show the startup progress:
(GREEN + RED) long time
then (GREEN + RED) short time
then GREEN permanent on
Power on GREEN
Bus reset not available
Asynchronous traffic +GREEN pulsing
Isochronous traffic +GREEN pulsing
Waiting for external trigger GREEN RED
External trigger event GREEN +RED pulsing
Table 22: LEDs showing normal conditions
1 status LED bicolor