Instruction manual

Guppy PRO Technical ManualV4.1.0
80
Description of the data path
Description of the data path
Block diagrams of the cameras
The following diagrams illustrate the data flow and the bit resolution of image
data after being read from the CCD sensor chip in the camera. The individual
blocks are described in more detail in the following paragraphs. For sensor data
see chapter Specifications on page 34.
Monochrome cameras
Setting LUT = OFF effectively makes full use of the 14 bit by bypassing the LUT cir-
cuitry; setting LUT = ON means that the most significant 12 bit of the 14 bit are
used and further down converted to 10 bit. For cameras with 12-bit ADC: the
most significant 10 bit of the 12 bit are used.
Figure 34: Block diagram b/w camera
Sensor
Analog
Gain
Analog
Oset
Analog
ADC
IEEE 1394b
interface
1394b
14 bit
Defect pixel
correction
(only CMOS)
14 bit
Camera control
HIROSE I/O
RS232
8 Bit
Frame
memory
14 bit 14 bit
14 bit
LUT
12
10
14 bit
CMOS: the following functions are
integrated in sensor:
Binning, sub-sampling, horizontal masking
Horizontal
sub-sampling
(only CCD)
Horizontal
binning
(only CCD)
Horizontal
masking
(only CCD)
*
* Some Guppy PRO models deliver 12 bit only.
See chapter Specifications on page 34.