Instruction manual

Guppy PRO Technical ManualV4.1.0
91
Description of the data path
The following table shows the BRIGHTNESS register:
Mirror function (only Guppy PRO F-503)
Guppy PRO F-503 cameras are equipped with a mirror function, which is built
directly into the sensor. The mirror is centered to the current FOV center and can
be combined with all image manipulation functions, like binning.
This function is especially useful when the camera is looking at objects with the
help of a mirror or in certain microscopy applications.
• With Guppy PRO F-503B, horizontal and vertical mirror is possible.
Register Name Field Bit Description
0xF0F00800 BRIGHTNESS Presence_Inq [0] Presence of this feature:
0: N/A
1: Available
Abs_Control [1] Absolute value control
O: Control with value in the value field
1: Control with value in the absolute
value CSR
If this bit= 1 the value in the value field
has to be ignored
--- [2..4] Reserved
One_Push [5] Write: Set bit high to start
Read: Status of the feature:
Bit high: WIP
Bit low: Ready
ON_OFF [6] Write: ON or OFF this feature
Read: read a status
0: OFF
1: ON
A_M_MODE [7] Write: set mode
Read: read current mode
0: MANUAL
1: AUTO
--- [8..19] Reserved
Value [20..31] Read/Write Value; this field is ignored
when writing the value in Auto or OFF
mode; if readout capability is not avail-
able reading this field has no meaning.
Table 50: CSR: Brightness