Installation manual

AVT GigE Cameras Installation Manual V1.1.0

Using Allied Vision viewer applications

Adjusting camera controls

Select the desired camera from the cameras window of the GigE Sample

Viewer. Click the wrench icon to open controls window. The controls

window is used to configure the camera frame rate, exposure time, color

balance, imaging mode, strobe functionality, pixel format, and much more.

A detailed explanation of camera controls can be found in the GigE Camera and

Driver Attributes document.

Live histogram

Start live view from the camera by selecting the eyeball icon. Click the

histogram icon, shown left. This launches an 8-bit live histogram. A his-

togram graphs number of pixels on the vertical axis and digital number

value on the horizontal axis.

Camera information

Select the desired camera from the cameras window of the GigE Sample

Viewer. Click the information icon, shown left. The information window

provides camera identify information including the serial number and

part number.

Figure 15: GigE Sample Viewer controls window

www



GigE Camera and Driver Attributes download link:

http://www.alliedvision.com/fileadmin/content/documents/

products/cameras/various/features/

GigE_Camera_and_Driver_Attributes.pdf