Instruction Manual

Mako Technical Manual V2.0.4
36
Camera interfaces
Camera interfaces
This chapter describes the Gigabit Ethernet port, inputs and outputs, and trig-
ger features.
Status LEDs
The tables below describe the status LEDs of Mako cameras.
Note

Read all Notes and Cautions in the AVT GigE Installation
Manual before using any interfaces.
www

For accessories like cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
Figure 23: Example: Rear view of Mako camera
LED1 color Status
Solid orange Ethernet link established
Flashing orange Network traffic
Table 11: Status LED (orange)
LED2 color Status
Solid green Camera powered
Slow flashing green Booting routine
Four rapid flashes per second Transmission error.
Contact [e-mail]
Table 12: Status LED (green)
Status LEDs
LED1 (orange)
8-pin
camera
LED2 (green)
I/O connector
(+ ext. power)