User Manual

Manta Technical Manual V7.0.1

Specifications

Manta G-223B/C (NIR)

Feature Specification

Sensor Type 2/3 (diag. 8 mm, 1 inch lens recommended) CMOS sensor: CMOSIS

CMV2000 (monochrome/color) with microlenses and global shutter

The monochrome version is also available as NIR enhanced variant

(Manta G-223B NIR). Except for the sensor response, the technical

data of the NIR enhanced variant are identical with Manta G-223B.

Effective chip size 11.26 mm x 5.98 mm

Cell size 5.5 µm x 5.5 µm

Resolution (maximum) 2048 x 1088 pixels

Lens mount C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

Maximum protrusion: 9.7 mm (see figure 64 on page 102)

ADC 12 bit

Pixel format Only monochrome: Mono8, Mono12Packed, Mono12

Only color: BayerRG8, BayerRG12Packed, BayerRG12, Mono8,

RGB8Packed, YUV411Packed, YUV422Packed, YUV444Packed,

BGR8Packed

Frame rates Up to 53 fps @124MB/s

(60 fps with burst mode, see StreamFrameRateConstrain in AVT GigE

Cameras and Driver Features document)

Gain control Manual: 0–26 dB (1dB/step); auto gain (select. ROI)

Exposure time 18 µs to 60 s; auto shutter (select. ROI)

External trigger event Rising edge, falling edge, any edge, level high, level low

External trigger delay 0 to 60 seconds in 1 µs increments

Fixed rate control 1 fps to maximum frame rate (steps of 0.1 fps)

Imaging modes Free-running, external trigger, fixed rate, software trigger

Sync Out modes Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO

Internal image memory 128 MByte, up to 59 frames

Smart functions Auto gain control, auto exposure control, 128 MByte image memory,

decimation (sub-sampling), config files (user sets), LUT, temperature

monitoring (resolution 0.031, accuracy ±1°C)

only color: auto white balance, color correction, hue, saturation

Table 13: Specification Manta G-223B/C (NIR)

Note



The number of frames (StreamHoldCapacity) depends on resolu-

tion and pixel format. Listed number of frames is typical for full

resolution and Mono8/Bayer8.