User Manual

Manta Technical Manual V7.0.1
105
Camera interfaces
Gigabit Ethernet port
The Gigabit Ethernet port conforms to the IEEE 802.3 1000BASE-T standard for
Gigabit Ethernet over copper. To prevent EMI (electromagnetic interference)
and for best performance, Category 6 (or higher) cables with S/STP shielding
and connectors are recommended.
Note

• Cable lengths up to 100 m are supported.
• The 8-pin RJ-45 jack has the pin assignment according to
the Ethernet standard (IEEE 802.3 1000BASE-T).
• For cameras that are PoE capable, the GigE connector can
be used to provide power to the camera.
•Manta PoE models can source power
– from 802.3af (1000 MBit/s) and
– from 802.3at compliant PSE devices (Power Sourcing
Equipment): such as switches injectors or NICs.
• If both interfaces are used for power (I/O and GigE con-
nector via PoE), the camera will only use the power from
the I/O connector.
Same main board for all Manta models
From serial number 503323258 on all Manta models includ-
ing PoE and board level versions contain the same main board.
PoE and non PoE
• How can I distinguish between PoE capable cameras and
cameras that are not PoE capable?
– PoE capable cameras have the letters PoE written on
the camera‘s label on the back side and the bottom
side of the camera.
Accessories
• Cables are available from AVT:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
• Ask your local dealer for more details.