User Manual

Manta Technical Manual V7.0.1
106
Camera interfaces
Camera I/O connector pin assignment (incl. PoE)
Note

From serial number 503323258 on all Manta models including
PoE and board level versions contain the same main board:
• All I/O circuits have the same properties.
•For Manta models with older serial number:
use the Manta Technical Manual V4.1.0
Pin Signal Direction Level Description
1 Camera GND In GND for RS232 and
ext. power
Ground for camera
power supply and
RS232
2 Camera Power In 8–30 V DC Camera power supply
3Video Type
Auto Iris Out
Out --- Video type auto iris
( FW 1.44)
4In 1 In Standard and PoE cameras:
U
in
(high) = 3–24 V
up to 36 V with external
resistor of 3.3 k in series
U
in
(low) = 0–1.0 V
Input 1 (SyncIn1)
5 --- --- --- ---
6 Out 1 Out Open emitter,
max. 10 mA
Output 1 (SyncOut1)
7 Isolated IO
GND
In/Out Common GND for In/Out Isolated input and out-
put signal ground
8 RxD RS232 In RS232 Terminal receive data
9 TxD RS232 Out RS232 Terminal transmit data
10 Isolated Out
Power
In Common VCC for outputs
max. 30 V DC
Power input for
opto-isolated outputs
11 In 2 In Standard and PoE cameras:
U
in
(high) = 3–24 V
U
in
(low) = 0–1.0 V
Input 2 (SyncIn2)
12 Out 2 Out Open emitter,
max. 10 mA
Output 2(SyncOut2)
Table 31: Camera I/O connector pin assignment
Note

Read all Notes and Cautions in the AVT GigE Installation
Manual before using the I/O connector.
1
2
3
4
5
6
7
8
9
10
1211