User Manual

Manta Technical Manual V7.0.1

Specifications

Manta G-031B/C

Caution



Before operating any AVT camera, read the safety instructions

and ESD warnings in the AVT GigE Installation Manual.

http://www.alliedvisiontec.com/emea/support/downloads/

product-literature/manta.html

Note



PoE capable cameras

How can I distinguish between PoE capable cameras and

cameras that are not PoE capable?

PoE capable cameras have the letters PoE written on the

camera’s label on the bottom side of the camera.

Feature Specification

Sensor Type 1/4 (diag. 4.5 mm) progressive scan SONY IT CCD ICX618AL/AQ with

EXview HAD CCD II microlens

Effective chip size 3.6 mm x 2.7 mm

Cell size 5.6 µm x 5.6 µm

Resolution (maximum) 656 x 492 pixels

Lens mount C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

Maximum protrusion: 9.7 mm (see figure 48 on page 86)

CS-Mount: 12.526 mm (in air); Ø 25.4 mm (32 tpi)

Maximum protrusion: 5.1 mm (see figure 49 on page 87)

ADC 14 bit

Pixel format Only monochrome: Mono8, Mono12Packed, Mono12

Only color: BayerRG8, BayerRG12Packed, BayerGR12, Mono8,

RGB8Packed, YUV411Packed, YUV422Packet, YUV444Packed,

BGR8Packed, RGBA8Packed, BGRA8Packed

Frame rates Up to 125 fps

Gain control Manual: 0–32 dB (1 dB/step); auto gain (select. ROI)

Exposure time 58 µs to 60 s; auto shutter (select. ROI)

External trigger event Rising edge, falling edge, any edge, level high, level low

External trigger delay 0 to 40 seconds in 1 µs increments

Fixed rate control 0.01 fps to maximum frame rate (steps of 0.1 fps)

Imaging modes Free-running, external trigger, fixed rate, software trigger

Table 3: Specification Manta G-031B/C