User Manual

Manta Technical Manual V7.0.1

Specifications

Sync Out modes Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO

Internal image memory 32 MByte, up to 99 frames

Smart functions Auto gain control, auto exposure control, 32 MByte image memory,

binning (monochrome binning, also for color cameras; but no color

binning), no decimation (no sub-sampling), user sets, LUT

only color: auto white balance, color correction, edge filter (sharpness),

hue, saturation

I/O Two configurable optocoupled inputs, two configurable optocoupled

outputs

RS232 port (serial port)

Digital interface IEEE 802.3 1000BASE-T (GigE Vision V1.2)

Camera control interface GenICam V1.0 compliant

Power requirements DC 8–30 V only via 12-pin HIROSE: external power supply needed

PoE models: compliant with Power over Ethernet IEEE 802.3at/af

Power consumption Typical < 3.7 W (@ 12 V DC); PoE: typical < 3.9 W

(maximal frame rates at full resolution)

Dimensions 86.4 mm x 44 mm x 29 mm (L x W x H); including connectors, without tri-

pod and lens

Mass 200 g (without lens);

Operating temperature +5°C to +45°C ambient temperature (without condensation)

Storage temperature -10°C to +70°C ambient temperature (without condensation)

Regulations CE, FCC Class B, RoHS (2011/65/EU)

Standard accessories Monochrome: protection glass

Color: IR cut filter

Optional accessories Monochrome: IR cut filter, IR pass filter

Color: protection glass

Tripod adapter

On request Gigabit Ethernet network card, Gigabit Ethernet network cables

Software packages Free of charge, see http://www.alliedvisiontec.com/html

Feature Specification

Table 3: Specification Manta G-031B/C

Note



The number of frames (StreamHoldCapacity) depends on resolu-

tion and pixel format. Listed number of frames is typical for full

resolution and Mono8/Bayer8.