User Manual

Manta Technical Manual V7.0.1

Specifications

Manta G-917B/C

Feature Specification

Sensor Type 1 (diag. 15.972 mm) progressive scan SONY IT CCD ICX814 ALG/AQG

with EXview HAD II microlenses

Effective chip size 12.5 mm x 10.0 mm

Cell size 3.69 µm x 3.69 µm

Resolution (maximum) 3384 x 2710 pixels

Lens mount C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

Maximum protrusion: 9.7 mm (see figure 64 on page 102)

ADC 14 bit

Pixel format Only monochrome: Mono8, Mono12Packed, Mono12

Only color: BayerRG8, BayerRG12Packed, BayerRG12, Mono8,

RGB8Packed, YUV411Packed, YUV422Packed, YUV444Packed,

BGR8Packed

Frame rates Up to 10 fps

Gain control Manual: 0–32 dB (1 dB/step); auto gain (select. ROI)

Exposure time 42 µs to 38 s; auto shutter (select. ROI)

External trigger event Rising edge, falling edge, any edge, level high, level low

External trigger delay 0 to 19 seconds in 1 µs increments

Fixed rate control 0.026 fps to maximum frame rate (steps of 0.1 fps)

Imaging modes Free-running, external trigger, fixed rate, software trigger

Sync Out modes Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO

Internal image memory 128 MByte, up to 14 frames

Smart functions Auto gain control, auto exposure control, binning (monochrome bin-

ning, also for color cameras; but no color binning), decimation (sub-

sampling), config files (user sets), LUT, temperature monitoring (resolu-

tion 0.031, accuracy ±1°C)

only color: auto white balance, color correction, hue, saturation

I/O Two configurable optocoupled inputs, two configurable optocoupled

outputs

RS232 port (serial port)

Digital interface IEEE 802.3 1000BASE-T (GigE Vision V1.2)

Camera control interface GenICam V1.0 compliant

Table 19: Specification Manta G-917B/C

Note



The number of frames (StreamHoldCapacity) depends on resolu-

tion and pixel format. Listed number of frames is typical for full

resolution and Mono8/Bayer8.