User Manual

Manta Technical Manual V7.0.1
8
Introduction
continued from last page
V3.0.0
[continued]
09.06.10
[continued]
[continued]
With the new firmware 1.40 due to a bug all Manta models
have only 12 bit in the data path (even if the ADC delivers
14 bit): See Figure 76: Block diagram monochrome camera
(type A, Manta G-031 / 032 / 033 / 046 / 095 / 125 / 145 /
146 / 201 / 504) on page 118 and Figure 77: Block diagram
color camera (type A, Manta G-031 / 032 / 033 / 046 / 095
/ 125 / 145 / 146 / 201 / 504) on page 118.
Due to a repaired bug in FPGA and microcontroller, the
StreamHoldCapacity changed: Manta G-032 from 49 frames
to 99 frames, Manta G-125 from 12 frames to 25 frames: see
chapter Manta G-032B/C on page 26 and chapter Manta G-
125B/C on page 34
RGBA24 and BGRA24 are not supported, see chapter
Specifications on page 24.
Manta board level cameras have now a cooling plate: see
–chapter Manta board level (PoE): dimensions on page 89
–chapter Manta board level (PoE): C-Mount on page 91
–chapter Manta board level (PoE): CS-Mount on page 93
–chapter Manta board level (PoE): M12-Mount on page
95
Added chapter Firmware update on page 87
V4.0.0 25.10.10 Added the information, that description of status LEDs can
be found in Manta Hardware Installation Guide, see Note
on page 104
Changed file format from FM7 to FM9
Added Manta G-033B/C (sensor: Sony ICX 414) and
Manta G-504B/C (sensor: Sony ICX 655):
Manta G-033B/C on page 28
Manta G-504B/C on page 52
Spectral sensitivity on page 57.
Camera lenses on page 75
Table 42 : Image memory size (typical; see note above) on
page 130
•chapter Resolution and ROI frame rates on page 133
Manta angled head models: chapter Manta W90 on page 82
to be continued on next page
Version Date Remarks
Table 1: Document history