Manual

Configuration of the camera

MARLIN Technical Manual V2.4.0

212

Sequence control

It is possible to make certain settings for a sequence of images beforehand

by using this register.

0xF1000220 SEQUENCE_CTRL Presence_Inq [0] Indicates presence of this

feature (read only)

--- [1..4] Reserved

AutoRewind [5]

ON_OFF [6] Enable/Disable this feature

--- [7..15] Reserved

MaxLength [16..23] Maximum possible length of a

sequence (read only)

SeqLength [24..31] Length of the sequence

0xF1000224 SEQUENCE_PARAM --- [0..4] Reserved

ApplyParameters [5] Apply settings to selected

image of sequence; auto-reset

IncImageNo [6] Increment ImageNo after

ApplyParameters has finished

--- [7..23] Reserved

ImageNo [24..31] Number of image within a

sequence

Table 106: Sequence control register