Manual

Configuration of the camera
MARLIN Technical Manual V2.4.0
214
Shading correction
Owing to technical circumstances, the interaction of recorded objects with
one another, optical effects and lighting non-homogeneities may occur in
the images.
Because these effects are normally not desired, they should be eliminated as
far as possible in subsequent image editing. The camera has automatic shad-
ing correction to do this.
Provided that a shading image is present in the camera, the on/off bit can
be used to enable shading correction.
The on/off and ShowImage bits must be set for saved shading images to be
displayed.
Note
L
Always make sure that the shading image is saved at the
highest resolution of the camera. If a lower resolution is cho-
sen and ShowImage is set to true, the image will not be dis-
played correctly.
Register Name Field Bit Description
0xF1000250 SHDG_CTRL Presence_Inq [0] Indicates presence of this
feature (read only)
BuildError [1] Could not built shading
image
--- [2..3] Reserved
ShowImage [4] Show shading data as image
BuildImage [5] Build a new shading image
ON_OFF [6] Shading on/off
Busy [7] Build in progress
--- [8..23] Reserved
GrabCount [24..31] Number of images
0xF1000254 SHDG_MEM_CTRL Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..4] Reserved
EnableMemWR [5] Enable write access
EnableMemRD [6] Enable read access
--- [7] Reserved
AddrOffset [8..31] In bytes
Table 108: Advanced register: Shading