Manual

Configuration of the camera

MARLIN Technical Manual V2.4.0

229

Advanced register: trigger counter

The trigger counter feature is controlled by the following advanced feature

Having this feature enabled, the current trigger counter value (external trig-

ger seen by hardware) will be inserted as a 32-bit integer value into any cap-

tured image.

Setting the Reset flag to 1 resets the trigger counter to 0 – the Reset flag

is self-cleared.

The ON_OFF and LinePos fields are simply mirrors of the time stamp feature.

Settings of these fields are applied to all image stamp features.

Additionally there is a register for direct read out of the trigger counter

value.

0xF1000620 TRGCNT_STAMP Presence_Inq [0] Indicates presence of this

feature (read only)

Reset [1] Reset trigger counter

--- [2..5] Reserved

ON_OFF [6] SIS (time stamp) on/off

--- [7] Reserved

--- [8..15] Reserved

LinePos [16..31] Line position of SIS

(time stamp)

0xF1000624 TRGCNT [0..31] Trigger counter

Table 127: Advanced register: Trigger counter

Note

The 4 bytes of the trigger counter value will be inserted as

the 9th to 12th byte of a line.