Instruction manual

Description of the data path
Guppy PRO Technical Manual V2.0.3
119
(see Figure 60: Mapping of possible Format_7 modes to F7M1...F7M7 (F-
503 only) For default mappings per factory see page 162 on page 120)
• Mappings can be stored via register (see Chapter Format_7 mode
mapping (only Guppy PRO F-503) on page 241) and are uploaded
automatically into the camera on camera reset.
•The default settings (per factory) in the Format_7 modes are listed in
the following table
Format_7 Guppy PRO monochrome Guppy PRO color
Mode_0 full resolution, no binning,
no sub-sampling
full resolution, no sub-sampling, no binning
Mode_1 2 x horizontal binning 2 x horizontal binning
Mode_2 2 x vertical binning 2 x vertical binning
Mode_3 2 x full binning 2 x full binning
Mode_4 2 out of 4 horizontal sub-sampling 2 out of 4 horizontal sub-sampling
Mode_5 2 out of 4 vertical sub-sampling 2 out of 4 vertical sub-sampling
Mode_6 2 out of 4 full sub-sampling 2 out of 4 full sub-sampling
Table 47: Default Format_7 binning and sub-sampling modes (per factory)
Note

•A combination of binning and sub-sampling modes is
not possible.
Use either pure binning or pure sub-sampling modes.
• The Format_ID numbers 0...27 in the binning / 
sub-sampling list on page 120 do not correspond to any
of the Format_7 modes.