Instruction manual

Specifications

Guppy PRO Technical Manual V2.0.3

Guppy PRO F-032B/C

Feature Specification

Image device Type 1/3 (diag. 6 mm) progressive scan SONY IT CCD ICX424AL/AQ with

HAD microlens

Effective chip size 4.9 mm x 3.7 mm

Cell size 7.4 µm x 7.4 µm

Picture size (max.) 656 x 492 pixels (Format_7 Mode_0)

Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

maximum protrusion: 10.1 mm

(see Figure 23: Guppy PRO C-Mount dimensions on page 56)

ADC 12 bit

Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV411, YUV422, RGB8

Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps

Up to 79 fps in Format_7

Gain control Manual: 0-24.4 dB (0.0359 dB/step); auto gain (select. AOI)

Shutter speed 27 µs … 67,108,864 µs (~ 67 s); auto shutter (select. AOI)

External trigger shutter Programmable, trigger level control, single trigger,

bulk trigger, programmable trigger delay

Look-up tables User programmable (12 bit  10 bit); default gamma (0.45)

Smart functions AGC (auto gain control), AEC (auto exposure control), autofunction

AOI, LUT, binning (only b/w), sub-sampling (only b/w), color

correction, hue, saturation, 1 storable user set

only color: AWB (auto white balance)

I/Os One configurable input (optocoupled),

three configurable outputs (optocoupled)

Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s

Digital interface IEEE 1394b (IIDC V1.31), 1 x copper connector

Power requirements DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE

Power consumption Typical 3.5 watt (@ 12 V DC)

(full resolution and maximal frame rates)

Dimensions 44.8 mm x 29 mm x 29 mm (L x W x H); incl. connectors, without tripod

and lens

Table 13: Specification Guppy PRO F-032B/C

Note



Maximum protrusion means the distance from lens flange to

the glass filter in the camera.