Instruction manual

Description of the data path

Guppy PRO Technical Manual V2.0.3

Mirror function (only Guppy PRO F-503)

Guppy PRO F-503 cameras are equipped with a mirror function, which is built

directly into the sensor. The mirror is centered to the current FOV center and

can be combined with all image manipulation functions, like binning.

This function is especially useful when the camera is looking at objects with

the help of a mirror or in certain microscopy applications.

• With Guppy PRO F-503B, horizontal and vertical mirror is possible.

• With Guppy PRO F-503C, only horizontal mirror is possible.

Note



Configuration

To configure this feature in an advanced register: See Table

127: Advanced register: Mirror on page 237.

Note



The use of the mirror function with color cameras and image

output in RAW format has implications on the BAYER-

ordering of the colors.

Figure 39: Mirror and Bayer order

Note



During switchover one image may be temporarily corrupted.

Horizontal mirror ON: R-G-G-B (only F- 503C)

Mirror OFF: G-R-B-G (only F-503C)