Instruction manual

Controlling image capture

The following screenshot displays the sequence of commands n

MARLIN Technical Manua

Page 103

eeded to work with deferred mode.

of controlling deferred mode

.8.2 FastCapture

size set in the BYTE_PER_PACKET register. The lower this value

y setting FastCapture to “true“, all images are recorded at rate, i.e.

the setting above does not affect the frame rate for the image intake but only the read out. This

orded at the highest sensor

Fo size (Dh= 13 fr.)

that two images are in FiFo

…………………….Read out the first image of FiFo

……………………….Stop continuous mode of camera

…………………….Check pres. of deferred mode and Fi

…………………….Switch deferred mode on

…………………….Do first One_shot

…………………….Do second One_shot

…………………….Check

…………………….Check how many images are left in FiFo

…………………….Read out the second image of FiFo

……………………….Check how many images are left in FiFo

Figure 60: Example

This mode can be activated only in Format_7.

When FastCapture is set to “false”, the maximum frame rate both for image acquisition and read

ut is associated with the packeto

is, the lower the attainable frame rate is.

B the highest possible frame

mode is ideal for applications where a burst of images need to be rec

speed but the output can be at a lower frame frequency to save bandwidth.