Instruction manual

Video formats, modes and bandwidth
10.7.6 MF-131
This model uses a CMOS sensor with global shutter. As mentioned earlier for the global shutter,
the integration time must be added to the readout time to define the maximum frame rate. The
next table gives an example: (it assumes full horizontal width and an integration time of 1 ms).
Limiting the field of view in both vertical as well as horizontal direction gives a proportional
to CCD sensors where the horizontal image limit does not increase in speed. This is in contrary
increase the frame rate.
A
OI_HEIGHT fps
1024 24,42
960 26,01
600 40,97
240 96,46
60 298,78
format7, global-shutter
1ms integration-time
480 50,69
120 175,84
Table 67: Frame rates MF-131
In order to calculate the maximum achievable frame rate (with certain shutter time) the
following equation can be used:
[] [] sShuttersHeightWidth
fps
+••
=
00000003.0
1
Formula 7: Equation for fps @ F-131
MARLIN Technical Manua
l
Page 125