Instruction manual

Configuration of the camera
448h 40
3C 00 00
info
44Ch 81 00 00
Unit dependent
02
00 00 450h 82 06
Table 69: ConfigRom cont.
ally, the en 0 (448h pro s the camera control
register:
FF F0000000h + 3C0000h * 4 = FFFF F0
 program to read or write to a
register, the following value must be entered in the ess fie
“F0F00000h + Offset”
And fin try with key 4 in this case) vide offset for the
FF F00000h
The base address of the camera control register is thus
FFFF F0F00000h.
The offset entered in the table always refers to the base address of F0F00000h.
This means that if you want to use the “DirectControl”
Addr ld:
MARLIN Technical Manua
l
Page 133