Instruction manual

Configuration of the camera
12.3.10 Feature control error statu s register
Offset Name Notes
640h Feat Erro alwaysure_Control_ r_Status_HI 0
644h Feature_Control_Error_Status_LO always 0
Table 79: Feature control error register
12.3.11 Video mode control and status registers for Format_7
The offset to the base address is in V-C The of 100h m t be added for Mode 1,
200h for Mode 2 200h and 300h for Mode 3.
SR_INQ_7_x. fset us
Offset Name Notes
000h MAX_IMAGE_SIZE_INQ
004h UNIT_SIZE_INQ
008h IMAGE_POSITION
00Ch IMAGE_SIZ above E See
010h COLOR_COD See above ING_ID
014h COLOR_COD above ING_INQ See
034h PIXEL_NUMER_INQ
038h TOTAL_BYTES_HI_INQ
03Ch TOTAL_BYT ES_LO_INQ
040h PACKET_PA _INQ RA See above
044h BYTE_PER_ above PACKET See
Table 80: Fo l and status re
 For all modes in Format_7, ErrorFlag_1 rrorFlag_ fresh on each access to the
Format_7 Register.
 Contrary to IIDC DCAM v. 1.3, registers re ant to Fo 7 are freshed on each access.
The “Setting_1” bit is automatically cleare fter each
 When ErrorFlag_ or ErrorFlag_2 are set and Format_7 is configured, no image capture is
started.
 to IIDC v.1.3, COLOR_CODING_ID set to a default value after an INITIALIZE or
“reset”.
the UnitBytePerPacket field is already filled in with a fixed
Q register.
rmat_7 contro gister
and E 2 are re ed
lev rmat_ re
d a access.
1
Contrary is
 Contrary to IIDC DCAM v.1.3,
value in the PACKET_PARA_IN
MARLIN Technical Manual
Page 150