Instruction manual

Configuration of the camera
12.4.10 Deferred image transport
e images indicated by NumOfImages are sent by setting the “SendImage” bit.
When “FastCapture” is set (in Format_7 only), images are recorded at the highest possible frame
rate.
Using the register, the sequence of recording and the transfer of the images can be paused.
Setting “HoldImg” prevents transfer of the image. The images are stored in ImageFIFO.
Th
Register Name Field Bit Description
0xF1000260 DEFERRED_TRANS Presence_Inq [0] Indicates presence of this
a re (read only) fe tu
[1..4] ---
[5] NumOfImages now
(au
SendImage Send
to reset)
HoldImg [6] Enable/Disable
transport mode
deferred
[7] Enable/disable fast capture
mode
FastCapture
--- [8..15]
FiFoSize [16..23] Size of FiFo in number of
images (read only)
NumOfImages [24..31]
: Number of images in
buffer
W: Number of images to send
R
ed image configuration
12.4.11 Frame i
This register can be used to double check the number of images received by the host computer
against the number of images which were transmitted by the camera. The camera increments this
counter with every FrameValid signal.
Table 93: Deferr register
nformation
Register Name Field Bit Description
0xF1000270 FRAMEINFO Presence_Inq [0] Indicates presence of
this feature (read
only)
et [1] Reset frame counter Res FrameCnt
--- [2..31]
0xF1000274 FRAMECOUNTER FrameCounter [0..31] Number of captured
frames since last
reset
Table 94: Frame information register
MARLIN Technical Manual
Page 162