Instruction manual

Specifications

4.10 F-131C

Specification

Image device 2/3 " (diag. 11 mm) Type global shutter CMOS sensor

Effective Picture

Elements

1280 (H) x 1024 (V)

Lens Mount

C-mount: 17.526 mm (in air); ∅ 25.4 mm (32 T.P.I.)

Mechanical Flange Back to filter distance: 8.2 mm

Picture Sizes Up to 1280 x 960 pixels (Format_2), supporting all smaller fixed

formats; 1280 x 1024 pixels (Format_7)

640 x 1024 pixels (Format_7 Mode_1, sub-sampling)

1280 x 512 pixels (Format_7 Mode_2, sub-sampling)

640 x 512 pixels (Format_7 Mode_3, sub-sampling)

Cell Size 6.7 µm x 6.7 µm

ADC 10 Bit

Data Path 8 Bit

Frame rates 3.75 Hz; 7,5 Hz; 15 Hz; up to 25 Hz in Format_7 Raw8; (12 fps

@YUV4:2:2; 17 fps @YUV4:1:1)

Gain Control Manual: 0–16 dB (13 x 1.25 dB))

White Balance Manual (U/V); One_Push; Auto (select. AOI)

Shutter Speed 20 µs- 67s; Auto shutter (select. AOI)

External Trigger Shutter Trigger_Mode_0, Trigger_Mode_1, Advanced feature: Trigger_Mode_15

(bulk); image transfer by command; Trigger delay

Internal FIFO-Memory Up to 4 frames

# Look Up Tables One, user programmable (10 Bit -> 8 Bit); separate Gamma (0.45) LUT

Smart Functions Dark signal non uniformity (DSNU) correction, Real time shading

correction; two configurable inputs, two configurable outputs, high

dynamic range (HDR) mode, image mirror (L-R↔ R-L), sub-sampling,

serial port (IIDC v. 1.31)

Transfer Rate 100 Mb/s, 200 Mb/s, 400 Mb/s

Digital Interface IEEE 1394 IIDC v. 1.3

Power Requirements DC 8 V – 36 V via IEEE 1394 cable or 12-pin HIROSE

Power Consumption Less than 3 Watts (@ 12 V d.c.)

Dimensions 58 mm x 44 mm x 29 mm (L x W x H); without tripod and lens

Mass <120 g (without lens)

Operating Temperature +5 – +45 ° Celsius

Storage Temperature -10 – +60 ° Celsius

Regulations EN 55022, EN 61000, EN 55024, FCC Class A, DIN ISO 9022

Options Host adapter card, locking IEEE-1394 cable, API (FirePackage), TWAIN

(WIA) -and WDM stream driver

Table 11: Specification MF-131C

The design and specifications for the products described above may change without notice.

MARLIN Technical Manua

Page 23