Instruction manual

Camera interfaces
Output mode
ID Mode Default
0x00 Off
0x01 Output state follows ‘PinState’ bit
0x02 Integration enable Output 1
0x04 reserved
0x05 reserved
0x06 FrameValid
0x07 Busy Output 2
0x08 Follow corresponding input
(Inp1 • Out1, Inp2 • Out2, …)
0x09..0x0F reserved
0x10..0x1F reserved
The “Polarity” setting refers to the input side of the optical coupler output, “PinState 0” switches
off the output transistor and produces a low level over the resistor connected from the output to
ground.
Table 23: Output routing
MARLIN Technical Manual
Page 46