Instruction manual

Controlling image capture

Trigger_Mode_15 is a bulk trigger, combining one external trigger event with continuous or

neshot or multishot internal trigger.

is is especially useful for:

It is an extension to the IIDC trigger modes. One external trigger event can be used to trigger a

multitude of internal image intakes.

 Exactly grabbing one image based on the first external trigger.

 Filling the camera’s internal image buffer with one external trigger without overriding

images.

 Grab an unlimited amount of images after one external trigger (Surveillance)

The next image details this mode.

Figure 55: Trigger_Mode_15

] and bitgroup [12-15] of the DCAM register: The functionality is controlled via bit [6

0xF0F00830 TRIGGER_MODE Presence_Inq [0] Presence of this

; feature: 0:N/A

1:Available

Abs_Control [1]

Control with value

in the absolute value

CSR

If this bit= 1 the

value in the value

ignored

Absolute value

control

in the value field

1: Control with value

field has to be

- [2..5] Reserved

ON=1

ON_OFF [6] Write ON or OFF this

feature,

Read: Status of the

feature; OFF=0

MARLIN Technical Manual

Page 92