Instruction manual
Marlin Technical ManualV.2.7.0
136
Video formats, modes and bandwidth
Marlin F-131: AOI frame rates
This model uses a CMOS sensor with global shutter. As mentioned earlier for the
non pipelined global shutter, the integration time must be added to the readout
time to define the maximum frame rate. The next table gives an example: (it
assumes full horizontal width and an integration time of 1 ms).
Read note in Chapter Video formats, modes and bandwidth on page 108.
Limiting the field of view in both vertical as well as horizontal direction gives a
proportional increase in speed. This is in contrary to CCD sensors where the hor-
izontal image limit does not increase the frame rate.
In order to calculate the maximum achievable frame rate (with certain exposure
time) the following equation can be used:
AOI height / pixel Frame rate / fps
1.024 24.42
960 26.01
600 40.97
480 50.69
240 96.46
120 175.84
60 298.78
Format_7, global shutter
1 ms integration time
Table 61: Frame rates Marlin F-131 as function of AOI height (full horizontal width)
Formula 11: Frame rate calculation Marlin F-131 as function of AOI height and width
frame rate
1
200μs Height Width 25ns 4μs++ExpTime+
--------------------- ---------------------- ---------------------- -------------------------- ---------------------- ----------
=