Instruction manual

Marlin Technical ManualV.2.7.0
170
Configuration of the camera
And finally, the entry with key 40 (448h in this case) provides the offset for the
camera control register:
FFFF F0000000h + 3C0000h x 4 = FFFF F0F00000h
The base address of the camera control register is thus:
FFFF F0F00000h
The offset entered in the table always refers to the base address of F0F00000h.
Offset 0-7 8-15 16-23 24-31
444h 00 03 7F 89
Unit dependent info 448h 40
3C 00 00
44Ch 81 00 00 02
450h 82 00 00 06
Table 84: Config ROM
Note

If you want to use the DirectControl program to read or write
to a register, enter the following value in the Address field:
F0F00000h + Offset