Instruction manual

Marlin Technical ManualV.2.7.0

205

Configuration of the camera

Look-up tables (LUT)

Load the look-up tables to be used into the camera and choose the look-up table

number via the LutNo field. Now you can activate the chosen LUT via the LUT_C-

TRL register.

The LUT_INFO register indicates how many LUTs the camera can store and shows

the maximum size of the individual LUTs.

The possible values for LutNo are 0..n-1, whereas n can be determined by read-

ing the field NumOfLuts of the LUT_INFO register.

0xF1000220 SEQUENCE_CTRL Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..4] Reserved

AutoRewind [5]

ON_OFF [6] Enable/Disable this feature

--- [7..15] Reserved

MaxLength [16..23] Maximum possible length of a

sequence (read only)

SeqLength [24..31] Length of the sequence

0xF1000224 SEQUENCE_PARAM --- [0..4] Reserved

ApplyParameters [5] Apply settings to selected

image of sequence; auto-reset

IncImageNo [6] Increment ImageNo after

ApplyParameters has finished

--- [7..23] Reserved

ImageNo [24..31] Number of image within a

sequence

Table 105: Sequence control register

0xF1000240 LUT_CTRL Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..5] Reserved

ON_OFF [6] Enable/Disable this feature

--- [7..25] Reserved

LutNo [26..31] Use look-up table with LutNo

number

Table 106: Advanced register: LUT