Instruction manual

Marlin Technical ManualV.2.7.0

206

Configuration of the camera

Shading correction

Owing to technical circumstances, the interaction of recorded objects with one

another, optical effects and lighting non-homogeneities may occur in the

images.

Because these effects are normally not desired, they should be eliminated as far

as possible in subsequent image editing. The camera has automatic shading cor-

rection to do this.

Provided that a shading image is present in the camera, the on/off bit can be

used to enable shading correction.

The on/off and ShowImage bits must be set for saved shading images to be dis-

played.

0xF1000244 LUT_MEM_CTRL Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..4] Reserved

EnableMemWR [5] Enable write access

--- [6..7] Reserved

AccessLutNo [8..15]

AddrOffset [16..31] byte

0xF1000248 LUT_INFO Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..7] Reserved

NumOfLuts [8..15] Maximum number of look-up

tables

MaxLutSize [16..31] Maximum look-up table size

(bytes)

Note



Always make sure that the shading image is saved at the high-

est resolution of the camera. If a lower resolution is chosen and

ShowImage is set to true, the image will not be displayed cor-

rectly.

Table 106: Advanced register: LUT