Instruction manual

Marlin Technical ManualV.2.7.0

207

Configuration of the camera

Deferred image transport

Using the register, the sequence of recording and the transfer of the images can

be paused. Setting HoldImg prevents transfer of the image. The images are

stored in ImageFIFO.

The images indicated by NumOfImages are sent by setting the SendImage bit.

When FastCapture is set (in Format_7 only), images are recorded at the highest

possible frame rate.

0xF1000250 SHDG_CTRL Presence_Inq [0] Indicates presence of this fea-

ture (read only)

BuildError [1] Could not built shading image

--- [2..3] Reserved

ShowImage [4] Show shading data as image

BuildImage [5] Build a new shading image

ON_OFF [6] Shading on/off

Busy [7] Build in progress

--- [8..23] Reserved

GrabCount [24..31] Number of images

0xF1000254 SHDG_MEM_CTRL Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..4] Reserved

EnableMemWR [5] Enable write access

EnableMemRD [6] Enable read access

--- [7] Reserved

AddrOffset [8..31] In bytes

0xF1000258 SHDG_INFO Presence_Inq [0] Indicates presence of this fea-

ture (read only)

--- [1..7] Reserved

MaxImageSize [8..31] Maximum shading image size

(in bytes)

Table 107: Advanced register: Shading