Instruction manual

Marlin Technical ManualV.2.7.0
223
Configuration of the camera
Reset of error codes
The ErrorCode field is set to zero on the next write access.
You may also reset the ErrorCode
• by writing 00000000h to the USER_PROFILE register.
0x07 Loading LUT data failed
0x08 Storing LUT data failed
Note

• A profile save operation automatically disables capturing
of images.
• A profile save or restore operation is an uninterruptable
(atomic) operation – the write response (of the asyn-
chronous write cycle) will be sent after completion of the
operation.
• Restoring a profile will not overwrite other settings than
listed above.
• If a restore operation fails or the specified profile does
not exist, all registers will be overwritten with the hard-
coded factory defaults (profile #0).
• Data written to this register is not reflected in the stan-
dard memory channel registers.
ErrorCode # Description
Table 128: User profile: Error codes