Instruction manual

Marlin Technical ManualV.2.7.0
224
Configuration of the camera
Stored settings
The following table shows the settings stored inside a profile:
The user can specify which user profile will be loaded upon startup of the camera.
This frees the user software from having to restore camera settings, that differ
from default, after every startup. This can be especially helpful if third party soft-
ware is used which may not give easy access to certain advanced features or may
not provide efficient commands for quick writing of data blocks into the camera.
Standard registers Standard registers
(Format_7)
Advanced registers
Cur_V_Frm_Rate
Cur_V_Mode
Cur_V_Format
ISO_Channel
ISO_Speed
BRIGHTNESS
AUTO_EXPOSURE (Target grey level)
SHARPNESS
WHITE_BALANCE (+ auto on/off)
HUE (+ hue on)
SATURATION (+ saturation on)
GAMMA (+ gamma on)
SHUTTER (+ auto on/off)
GAIN
TRIGGER_MODE
TRIGGER_DELAY
ABS_GAIN
ABS_TRIGGER_DELAY
IMAGE_POSITION (AOI)
IMAGE_SIZE (AOI)
COLOR_CODING_ID
BYTES_PER_PACKET
TIMEBASE
EXTD_SHUTTER
IO_INP_CTRL
IO_OUTP_CTRL
IO_INTENA_DELAY
AUTOSHUTTER_CTRL
AUTOSHUTTER_LO
AUTOSHUTTER_HI
AUTOGAIN_CTRL
AUTOFNC_AOI (+ on/off)
COLOR_CORR (on/off)
TRIGGER_DELAY
MIRROR_IMAGE
HIGH_SNR
TIMESTAMP
LUT_CTRL (LutNo; ON_OFF is not saved)
LUT_DATA
Table 129: User profile: stored settings