Instruction manual

Marlin Technical ManualV.2.7.0
27
Specifications
Marlin F-146B/C
Feature Specification
Image device Type 1/2 (diag. 8 mm) progressive scan SONY CCD ICX-267AL/AK with HAD microlens
Effective chip size 6.5 mm x 4.8 mm
Cell size 4.65 μm x 4.65 μm
Picture size (max.) 1392 x 1040 pixels (Format_7 Mode_0)
Lens mount C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
mechanical flange back to filter distance: 8.2 mm
ADC 12 bit
Color modes Only color: Raw8, RGB8, YUV422, YUV411
Frame rates 3.75 fps, 7.5 fps, 15 fps
Up to 17.4 fps in Format_7
Gain control Manual: 0-24 dB (0.035 dB/step); auto gain (select. AOI)
Shutter speed 46 μs … 67,108,864 μs (~67s); auto shutter (select. AOI)
External trigger shutter Trigger_Mode_0, Trigger_Mode_1, advanced feature: Trigger_Mode_15 (bulk);
image transfer by command; trigger delay
Internal FIFO memory Up to 3 frames
Number of look-up
tables
One, user-programmable (10 bit  8 bit); gamma (0.5)
Smart functions Real-time shading correction image sequencing, image mirror (L-R  R-L), bin-
ning, secure image signature (SIS), user profiles
Two configurable inputs, two configurable outputs
RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s
Digital interface IEEE 1394 IIDC V1.3
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE
Power consumption Less than 3 watt (@ 12 V DC)
Dimensions 72 mm x 44 mm x 29 mm (L x W x H); without tripod and lens
Mass <120 g (without lens)
Operating temperature +5 ... +45 °Celsius
Storage temperature -10 ... +70 °Celsius
Regulations CE, FCC Class B, RoHS (2011/65/EU)
Standard accessories b/w and color: IR cut filter
Optional accessories b/w: IR cut filter, IR pass filter; color: protection glass
On request Host adapter card, angled head, locking IEEE 1394 cable
Software packages http://www.alliedvision.com/en/support/software-downloads (free of charge)
Table 7: Specification Marlin F-146B/C