Instruction manual

Marlin Technical ManualV.2.7.0
47
Camera interfaces
Status LEDs
Status LED green
The green LED (power) indicates that the camera is being supplied with suffi-
cient voltage and is ready for operation.
Status LED yellow
The following states are displayed via the yellow LED:
Figure 22: Position of Status LEDs
State Description
Power/S2 LED off - power off
LED on - power on
Table 14: LED indication: green
State Description
Com/S1 Asynchronous and isochronous data transmission
active (indicated asynchronously to transmission
over the 1394 bus)
Table 15: LED indication: yellow
Status LEDs
green yellow