Instruction manual

Configuration of the camera
MARLIN Technical Manual
Page 106
11.4.9 Shading correction
Owing to technical circumstances, the interaction of recorded objects with one another, optical
effects and lighting non-homogeneities may occur in the images.
Because these effects are normally not desired, they should be eliminated as far as possible in
subsequent image editing. The camera has automatic shading correction to do this.
Provided that a shading image is present in the camera, the on/off bit can be used to enable
shading correction.
The “on/off” and “ShowImage” bits must be set for saved shading images to be displayed.
 Always make sure that the shading image is saved at the highest resolution of the camera.
If a lower resolution is chosen and ShowImage is set to “true”, the image will not be
displayed correctly.