Instruction manual

Configuration of the camera
MARLIN Technical Manual
Page 112
11.4.14 Delayed Integration enable
A delay time between initiating exposure on the sensor and the activation edge of the IntEna
signal can be set using this register. The on/off flag activates/deactivates integration delay. The
time can be set in µs in DelayTime.
 Please note that only one edge is delayed.
 If IntEna_Out is used to control an exposure, it is possible to have a variation in brightness
or to precisely time a flash.
Figure 49: Delayed integration timing
Offset Name Field Bit Description
0xF1000340 IO_INTENA_DELAY Presence_Inq [0] Indicates
presence of this
feature (read
only)
--- [1..5]
ON_OFF [6] Enable/Disable
integration
enable delay
--- [7..11]
DELAY_TIME [12..31] Delay time in µs
Table 78: Delayed integration configuration register