Instruction manual

Camera interfaces
MARLIN Technical Manual
Page 32
Output mode
ID Mode Default
0x00 Off
0x01 Output state follows ‘PinState’
bit
0x02 Integration enable Output 1
0x03 Incremental decoder compare
0x04 tbd (SPI internal DCLK)
0x05 tbd (SPI external DCLK)
0x06 FrameValid
0x07 Busy
0x08 Follow corresponding input
(Inp1 → Out1, Inp2 → Out2, …)
Output 2
0x09..0x0F reserved
0x10..0x1F reserved
Table 19: Output routing
The “Polarity” setting refers to the input side of the optical coupler output, “PinState 0” switches
off the output transistor and produces a low level over the resistor connected from the output to
ground.