Instruction manual

Controlling image capture
MARLIN Technical Manual
Page 68
What to pay attention to when changing the parameters:
 If the ApplyParameters flag is used when setting the parameters, all not-configured values
are set to default values. As changing a sequence normally affects only the value of a
specific register, and all other registers should not be changed, the ApplyParameters flag
may not be used here.
 The values stored for individual images can no longer be read.
 If the camera is switched into sequence mode, the changes to the IIDC v. 1.3 registers for
the image specified in ImageNo take immediate effect.
 Changes in the image size and the BytePacket settings need to be mirrored in the host
computer when using e.g. FirePackage, as they affect the amount of data, and the number
of packets to be sent for one image, and thus the creation of new image-events.