Instruction manual

Configuration of the camera
MARLIN Technical Manua
l
Page 91
448h 40
3C 00 00
Unit dependent
info
44Ch 81 00 00 02
450h 82 00 00 06
Table 48: ConfigRom cont.
And finally, the entry with key 40 (448h in this case) provides the offset for the camera control
register:
FFFF F0000000h + 3C0000h * 4 = FFFF F0F00000h
The base address of the camera control register is thus
FFFF F0F00000h.
The offset entered in the table always refers to the base address of F0F00000h.
 This means that if you want to use the “DirectControl” program to read or write to a
register, the following value must be entered in the Address field:
“F0F00000h + Offset”