Operating instructions

Page 6 of 20
Documentation FireView – Distributed by Allied Vision Technologies
3.2. Installation under WINDOWS™ 2000 and XP™
First of all “Plug and Play” will find the IEEE1394 interface card and starts searching for ap-
propriate drivers. Normally the standard Microsoft Windows driver for OHCI cards will be in-
stalled.
After the installation is complete it is the users task to replace the standard Microsoft OHCI
driver by the intek driver. The following steps show how to do this work.
IMPORTANT: Only replace the standard Microsoft driver for those cards that shall be owned
by the intek driver. The intek driver can live side by side with the Microsoft driver when multi-
ple cards are present in the system.
Replacing the Microsoft driver requires the following steps:
1.)
Call the device manager and right click on the IEEE1394 card and choose actualise driver.
Under Windows 2000 you must go over the properties menu.
2.)
In the following dialog choose to select the driver from a list.